Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

CLIM Firmware Updates with the System Running” (page 155)), and not bring down both paths for
any disk.
• Check the storage disk configuration on the running NonStop system.
• Make a primary group and a backup group based on the CLIMs configured as primary and
backup paths for disks.
1. Find out through which CLIMs the disk paths are configured and the status of the paths:
a. Using the Multi-Resource Actions window, select the resource type CLIM Attached
Disk.
All the logical disks configured through CLIMs are listed.
The Primary Path or Backup Path attributes show the configured CLIM information
of the disk.
The Primary Path State and Backup Path State attribute show whether the path through
the CLIM connected to the disk is up or down.
152 Upgrading CIP