Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

• Check which two CLIMs implement $ZTCP0 and $ZTCP1.
At the TACL prompt, issue the command:
TACL> SCF INFO SUBNET $ZTCP*.*, DETAIL
This shows which CLIMs implement the two processes. For example (IP addresses and system
name removed):
In this example, CLIMs C1002581 and C1002583 implement the $ZTCP0 and $ZTCP1
processes.
Estimating Time for CLIM Firmware Updates
You can use Table 11 (page 154) to estimate the total amount of time needed to update the specified
components in your environment.
Table 11 Firmware Update Time Estimates and Calculation Form
Estimated time for your
environment (fill in the
CommentsEstimated time (minutes)
Number of
components
updatedT#Object
value based on the
information in the
previous columns)
A maximum of 8 are
updated in parallel.
2 to 4Up to 16T0848CLIM ROM
4 to 8Up to 32
5 to 7. No reboot
required.
Up to 16T0848CLIM iLO
15 to 21Up to 32
2Multiple NICs
on different
T0849NIC
CLIMs (1 NIC
per CLIM)
2 to 4Up to 16T0846Smart
Array
Controller
4 to 8Up to 32
154 Upgrading CIP