Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

• In Chapter 3 under “On the CLIM” (page 86), indicated that the provider option must be used
for CLIMs using the MULTIPROV ON option.
• In Chapter 3, changed examples under:
“Ethernet LAN Status” (page 88)◦
◦ “Kernel Routing Table Information” (page 89)
◦ “Hard Disk Space Usage” (page 91)
◦ “IPSec Configuration” (page 91)
• In Chapter 3, deleted obsolete information from Example 13: “CLIM-to-CLIM Failover (IP CIP)”
(page 95).
• In Chapter 3 under “Running tcpdump” (page 126), added example for CLIMs with MULTIPROV
ON.
• In Chapter 3 under “Configuring CLIM-to-CLIM Failover (IP CIP)” (page 95), added reference
to section describing configuring CLIMs with MULTIPROV ON.
• In Chapter 3 under “Configuring Pre-Shared Keys” (page 105), indicated that each provider
under MULTIPROV ON has its own pre-shared keys.
• In Chapter 3 under “Configuring Security Policies” (page 105), indicated that each provider
under MULTIPROV ON has its own security policy configuration.
• In Chapter 3 under “Configuring Security Associations” (page 106), indicated that each provider
under MULTIPROV ON has its own security association configuration.
• In Chapter 3 under “Configuring Remote Information” (page 106), indicated that each provider
under MULTIPROV ON has its own remote configuration.
• In Chapter 3 under “Using IPSec” (page 107), indicated that the example assumes MULTIPROV
is OFF.
• In Chapter 3 under “Configuring climiptables” (page 109), changed syntax to include -prov
prov-name option.
• In Chapter 3 under “Configuring iptables/ip6tables” (page 110), described the -prov
prov-name option.
• In Chapter 3, added note under “Displaying a Datagram’s Route to a Network Host by Using
Traceroute” (page 119) and “Troubleshooting Network Applications Using Tcpdump” (page 126)
for CLIMs with the MULTIPROV attribute set to ON.
• In Chapter 3, added new section, “Setting Up Multiple Providers per CLIM” (page 129).
• In Chapter 3, revised section, “Changing Providers, Adding and Starting a CLIM (IP and Telco
Only)” (page 130).
• In Chapter 4, added new section, “Falling Back to Previous RVUs that Support the Multiple
Providers per CLIM Feature” (page 169).
• In Chapter 6 under “Network Partitioning Differences” (page 182), added information on the
MULTIPROV option.
• In Chapter 6, changed table under “NonStop TCP/IPv6 Attributes and Their CIP Equivalents”
(page 194) to support the MULTIPROV option.
16