Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Table 17 Subsystem Task Comparison (continued)
In CIP, Use...In Parallel Library TCP/IP and
NonStop TCP/IPv6, Use...
In Conventional TCP/IP, Use...Task
No equivalentNo equivalentSCF STATS ADDRMAP
command
Get Statistics
about the
ADDRMAP object
No equivalentSCF STATUS ENTRY commandSCF STATUS ENTRY
command
Get dynamic
Status of a
specified entry
climcmd climname
netstat –s
SCF STATUS MON commandNo equivalentGet dynamic
Status of a MON
process
SCF STATUS PROCESS
$ZZCIP for MAN process
SCF STATUS PROCESS
$ZZTCP command for MAN
process
SCF STATUS PROCESS
TCP/IP
process-namecommand
Get Status on
primary and
backup processes
No equivalentSCF STATUS PROCESS
TCP6SAM-name
SCF STATUS PROCESS
TCP/IP process-name
Get Status on the
transport-service
provider
CLIMCMD clim-name
climstatus -o l
SCF STATUS SUBNET
command
SCF STATUS SUBNET
command
Get Status on a
network interface
None, routes have no statusSCF STATUS ROUTE commandSCF STATUS ROUTE
command
Get Status on
network routes
SCF STATUS CLIM
clim-name, CLIMCMD
SCF STATUS ADAPTER
$ZZLAN.adapter-name
SCF STATUS ADAPTER
$ZZLAN.adapter-name
Get Status on the
adapter (or
module)
clim-name climstatus and
CLIMCMD clim-name psclim
commands. See Chapter 3
(page 69) for information
about these CLIMCMD
commands.
SCF STATUS PROVIDER
command
No equivalentNo equivalentGet Status on the
PROVIDER object
No equivalentNo equivalentSCF STATUS SERVER
command
Get Status on the
SERVER object
SCF STOP PROCESS
command. If the process is
SCF STOP PROCESS
command. (If the process is
No equivalent task is needed
as there is no MAN process
Stop a MAN
process
configured as persistent, theconfigured as persistent, the
ABORT command must beSTOP command must be
issued to the Kernel subsystemissued to the kernel subsystem
or the persistence manageror the persistence manager
restarts it.) restarts it. See “Starting and
Restarting CIP” (page 100). If
there are open sockets, you
ABORT PROCESS, FORCED
command.
SCF STOP MON if no open
sockets, otherwise, ABORT
SCF STOP MON commandNo equivalent task is needed
as there is no MON process
Stop a MON
process
MON, FORCED command. (If
the process is configured as
persistent, the ABORT
command must be issued to
the Kernel subsystem or the
persistence manager restarts
it. See “Starting and Restarting
CIP” (page 100).
180 IP CIP Migration, Compatibility and Operational Differences