Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

ManualsBrandsHP ManualsServerHP Integrity NonStop J-Series

181

182

183

184

185

186

187

188

189

190

The commands supported by NonStop TCP/IPv6 and those supported by CIP are:

SubnetRouteProcessCommand/Object

NonStop TCP/IPv6, CIPAbort

NonStop TCP/IPv6, CIPNonStop TCP/IPv6, , CIPNonstop TCP/IPv6, CIPInfo

NonStop TCP/IPv6Listopens

NonStop TCP/IPv6, CIPNonStop TCP/IPv6, , CIPNames

NonStop TCP/IPv6, CIPPrimary

NonStop TCP/IPv6NonStop TCP/IPv6NonStop TCP/IPv6Stats

NonStop TCP/IPv6, CIPNonStop TCP/IPv6NonStop TCP/IPv6Status

NonStop TCP/IPv6, CIPStop

NonStop TCP/IPv6, CIPTrace

NonStop TCP/IPv6, CIPVersion

Applications that expect the SAM process to have certain product numbers, versions, process

name, or program name must be changed.

Configuring SWAN Adapters on a CLIM

Configuring SWAN adapters on a CLIM is the same as for standard IP, with one additional step

performed on the Provider: the Provider must have the bootp receive port set. This is done with the

SCF ALTER PROVIDER command. In the following example, the SWAN TCP processes (Providers)

are $ZTC0 and $ZTC1:

24> alter prov $zzcip.ztc0, brecvport 67

25> info prov $zzcip.ztc0, detail

CIP Detailed Info PROVIDER \NSBLDE6.$ZZCIP.ZTC0

*TPName.................... $ZTC0

*Type...................... IPDATA

*HostID.................... 0.0.0.0

*Hostname.................. NSBLDE6

*TCP-Listen-Que-Min........ 128

*BRecvPort................. (67 )

*Family.................... INET

*Share-Ports............... 1000

Associated CLIMs:

Name Index

C1002581 0

26> alter prov $zzcip.ztc1, brecvport 67

27> info prov $zzcip.ztc1, detail

CIP Detailed Info PROVIDER \NSBLDE6.$ZZCIP.ZTC1

*TPName.................... $ZTC1