Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Table 24 Commands and Object Types for CIPMAN
Object Types
ROUTEPROVIDERPROCESSMONCLIMSCF Command
XXXXABORT
XXXADD
XXALTER
XXXDELETE
XXXXINFO
XXLISTOPENS
XXXXXNAMES
XPRIMARY
XXXSTART
XXSTATS
XXXXSTATUS
XXXXSTOP
XSWITCH
XXXXTRACE
XXXVERSION
Table 25: Commands and Object Types for CIPSAM lists commands and object types for CIPSAM:
Table 25 Commands and Object Types for CIPSAM
Object Types
SUBNETPROCESSSCF Command
XABORT
XXINFO
XNAMES
XPRIMARY
XSTATUS
XSTOP
XTRACE
XVERSION
Object Types
You can monitor and control the CIP subsystem by issuing commands that act on one or more CIP
subsystem objects. Each object has an object type and an object name. The object type describes
the type of object. The object name uniquely identifies the object within the system.
Figure 26: CIP SCF Object Hierarchy shows the full object hierarchy for CIPMAN, CIPSAM, and
the CLIM software. The CIPMAN, CIPSAM, MON, CLIM, ROUTE, and PROVIDER objects reside
on the NonStop host system and are controlled and displayed by SCF commands directed to
CIPMAN, CIPSAM, or the persistence manager ($ZZKRN). This section describes those commands.
Object Types 217