Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Example 35 DELETE ROUTE
> DELETE ROUTE $ZZCIP.ZTC1.ROUTE2
INFO Commands
INFO is a non-sensitive command that displays the configured settings for the specified object. An
asterisk (*) next to a field name in the display indicates that the attribute is alterable. By default,
the command displays a summary of the object configuration. Some commands allow specification
of one or either of the following modifiers to change the output format:
DETAIL
Specifies that the display is to include additional detailed information about the object.
OBEYFORM
Causes the configuration to be displayed as ADD or ALTER commands so that it can be
re-created.
INFO CLIM
The INFO CLIM command displays the configured attributes for the specified CLIM(s).
NOTE: The storage subsystem ($ZZSTO) also supports an INFO CLIM command. For syntax and
display examples, see the SCF Reference Manual for the Storage Subsystem.
INFO CLIM Command Syntax
INFO CLIM $ZZCIP.clim-name[,{DETAIL | OBEYFORM}]
clim-name
Is the name of the CLIM to display. A wildcard can specify multiple CLIMs.
DETAIL
Specifies that the display is to include additional detailed information about the CLIM.
OBEYFORM
Causes the configuration to be displayed as ADD command(s), so that it can be re-created.
Example 36 displays summary information for all CLIMs recognized by this system.
Example 36 INFO CLIM With Summary Display, NonStop NS16000 Series Server
> INFO CLIM $ZZCIP.*
CIP Info CLIM
Name Mode Location ConnPts Provider
N100241 IP (100 ,2 ,4 ,1) 2 ZTC0
N100373 IP (100 ,2 ,5 ,1) 2 ZTC0
S101252 STORAGE (101 ,2 ,5 ,1 ) 2 --
S101373 STORAGE (101 ,3 ,7 ,3 ) 2 --
Mode
Shows the operating mode of the CLIM. An IP CLIM provides access to TCP/IP networking. A
STORAGE CLIM provides access to disks and other storage devices. A CLIM can provide both
access to TCP/IP networking and access to disks and other storage devices.
ConnPts
Shows whether there are one or two ServerNet connections for each fabric between the CLIM
and the NonStop host.
Provider
Shows the name of the IPDATA provider associated with a CLIM that is configured for IP MODE.
Example 37 shows summary information for all known CLIMs on a NonStop system.
CIPMAN SCF Commands 235