Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Example 37 INFO CLIM, Summary
> INFO CLIM $ZZCIP.*
CIP Info CLIM
Name Mode Location ConnPts Provider *MultiProv
N1002541 IP (100 ,2 ,5 ,4 ,1 ) 2 ZTC0 ON
N1002551 IP (100 ,2 ,5 ,5 ,1 ) 2 ZTC0 ON
N1002581 IP,STORAGE (100 ,2 ,5 ,8 ,1 ) 1 ZSAM1 OFF
N1002553 STORAGE (100 ,2 ,5 ,5 ,3 ) 2 -- --
Location
Shows the location specified in the ADD CLIM command and is composed of five numbers:
group, module, slot, port, and fiber.
For descriptions of the fields, see Example 38.
Example 38 displays detailed information for N1002541, which is configured for IP MODE.
Example 38 INFO CLIM, Detailed, IP CLIM
> INFO CLIM $ZZCIP.N1002541, DETAIL
CIP Detailed Info CLIM \MYSYS.$ZZCIP.N1002541
Mode....................... IP
Configured Location........ Group 100 , Module 2 , Slot 5 , Port 4 , Fiber 1
ConnPts.................... 2
X1 Location................ Group 100 , Module 2 , Slot 5 , Port 4 , Fiber 1
Y1 Location................ Group 100 , Module 3 , Slot 7 , Port 3 , Fiber 1
SvNet ID 1................. 0x000E3F22
X2 Location................ Group 100 , Module 2 , Slot 5 , Port 3 , Fiber 2
Y2 Location................ Group 100 , Module 3 , Slot 7 , Port 3, Fiber 2
SvNet ID 2................. 0x000E3F23
Maintenance Interface IP... 16.105.172.18 (Last Known)
Network CLIM Information:
*MultiProv.................. ON
*Provider................... ZTC0
Index...................... 2
Maintenance Providers Configured:
ZTCP0 16.107.186.106
NOTE: The Fiber attribute might not be supported on your system. For more information, see the
planning guide for your system.
Mode
Shows the operating mode of the CLIM. An IP CLIM provides access to TCP/IP networking. A
STORAGE CLIM provides access to disks and other storage devices. A Telco CLIM (Mode
OPEN) provides access to Telco protocols to communicate with a Telco network.
Configured Location
Lists the location configured in the ADD CLIM command.
ConnPts
Shows whether there are one or two ServerNet connections for each fabric between the CLIM
and the NonStop host.
X1 Location
Shows the CLIM's expected X-fabric connection location based on the configured location.
Y1 Location
Shows the CLIM's expected Y-fabric connection location based on the configured location.
236 SCF Reference for CIP