Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

SvNet ID 1
Shows the CLIM ServerNet ID based on the configured location.
X2 Location
Shows the CLIM’s expected second X-fabric connection location based on the configured
location. This attribute is applicable only when the CLIM’s CONNPTS attribute is 2.
Y2 Location
Shows the CLIM’s expected second Y-fabric connection location based on the configured
location. This attribute is applicable only when the CLIM’s CONNPTS attribute is 2.
SvNet ID 2
Shows the CLIM’s second ServerNet ID based on the configured location. This attribute is
applicable only when the CLIM’s CONNPTS attribute is 2.
Maintenance Interface IP
Shows the dedicated service LAN (eth0) IP address of the CLIM.
If the CLIM is in the STOPPED state, this field indicates the last known dedicated service LAN
IP address. If the information is not known, Not Known is displayed. If the information is based
on last known information, but may not be accurate, (Last Known) is shown after the IP
address.
MultiProv
Shows whether the specified IP or OPEN MODE CLIM support association with multiple IPDATA
providers simultaneously.
Provider
Shows the name of the single IPDATA provider associated with a CLIM that is configured with
IP or OPEN MODE and MULTIPROV OFF. For an IP or OPEN MODE CLIM with MULTIPROV
ON, this shows the name of the IPDATA provider that would be associated with all networking
objects configured on the CLIM during conversion from MULTIPROV OFF CLIM-based
configuration to MULTIPROV ON CLIM-based configuration.
Index
Shows the index value for this IP or Telco CLIM within the associated IPDATA provider. This
attribute is applicable only when the CLIM is configured with IP or OPEN MODE. This value
is internally generated by CIPMAN.
Maintenance Providers Configured
Shows the name of maintenance providers that are associated with this CLIM and the IP
addresses that have been configured for each maintenance provider. This attribute is applicable
only when the CLIM is configured with IP MODE. This entry is not shown if no maintenance
provider is associated with this CLIM.
This is a sample detailed display of Telco CLIM O1002543, (Open MODE):
Example 39 INFO CLIM Detailed, Telco CLIM, OPEN MODE
> INFO CLIM $ZZCIP.01002543, DETAIL
CIP Info 01002543 DETAIL
CIP Detailed Info CLIM \MYSYS.$ZZCIP.01002543
Mode....................... OPEN
Configured Location........ Group 100 , Module 2 , Slot 5 , Port 4, Fiber 3
ConnPts.................... 2
X1 Location................ Group 100 , Module 2 , Slot 5 , Port 4, Fiber 3
Y1 Location................ Group 100 , Module 3 , Slot 7 , Port 4, Fiber 3
SvNet ID 1................. 0x000E3F26
X2 Location................ Group 100 , Module 2 , Slot 5 , Port 4, Fiber 4
Y2 Location................ Group 100 , Module 3 , Slot 7 , Port 4, Fiber 4
SvNet ID 2................. 0x000E3F27
CIPMAN SCF Commands 237