Manualshelf

Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

ManualsBrandsHP ManualsServerHP Integrity NonStop J-Series
231232233234235236237238239240
Maintenance Interface IP... 16.105.172.20
Network CLIM Information:
MultiProv.................. OFF
Provider................... ZSAM2
Index...................... 0
For definitions of the fields, see Example 38 (page 236).
This is a sample detailed display of S1002551, configured as Storage MODE:
Example 40 INFO CLIM Detailed, Storage
> INFO CLIM $ZZCIP.S1002551, DETAIL
CIP Detailed Info CLIM \MYSYS.$ZZCIP.S1002551
Mode....................... STORAGE
Configured Location........ Group 100 , Module 2 , Slot 5 , Port 5 , Fiber 1
ConnPts.................... 2
X1 Location................ Group 100 , Module 2 , Slot 5 , Port 5 , Fiber 1
Y1 Location................ Group 100 , Module 3 , Slot 7 , Port 5 , Fiber 1
SvNet ID 1................. 0x000E3F28
X2 Location................ Group 100 , Module 2 , Slot 5 , Port 5 , Fiber 2
Y2 Location................ Group 100 , Module 3 , Slot 7 , Port 5 , Fiber 2
SvNet ID 2................. 0x000E3F29
Maintenance Interface IP... 16.105.172.19
The Fiber attribute might not be supported on your system. For more information, see the planning
guide for your system.
For definitions of the fields, see the IP CLIM example.
A sample display N1002531 in the form of a command (Obey) file is:
Example 41 INFO CLIM With OBEYFORM Display
> INFO CLIM $ZZCIP.N1002531, OBEYFORM
ADD CLIM $ZZCIP.N1002531 , &
MODE IP , &
CONNPTS 2 , &
LOCATION (100 , 2 , 5 , 3 , 1 ) , &
MULTIPROV OFF , &
PROVIDER ZSAM2
INFO PROCESS
The INFO PROCESS command displays attributes of the CIPMAN process. The DETAIL and
OBEYFORM options are not valid for this command.
INFO PROCESS Command Syntax
INFO PROCESS $ZZCIP
Example 42 displays summary information for CIPMAN on this system.
Example 42 INFO PROCESS Summary
> INFO PROCESS $ZZCIP
CIP Info PROCESS \MYSYS.$ZZCIP
PPID................ ( 2,289) BPID............... ( 3,271)
INFO PROVIDER
The INFO PROVIDER command displays the configured attributes for the specified PROVIDERs on
this system.
238 SCF Reference for CIP