Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

LISTOPENS PROVIDER Command Syntax
LISTOPENS PROVIDER $ZZCIP.prov-name [,DETAIL]
prov-name
Is the name of the provider to which the command applies. A wildcard can specify a set of
providers.
Example 53 displays information about processes that have opened sockets on PROVIDER ZTC0.
Example 53 LISTOPENS PROVIDER Summary
> LISTOPENS PROV $ZZCIP.ZTC0
CIP Listopens PROVIDER \MYSYS.$ZZCIP.ZTC0
Openers Ppid State Proto Lport Provider CLIM
\MYSYS.$MYWEB 1,333 LISTEN TCP http ZTC0 N1002532
\MYSYS.$MYWEB 1,333 LISTEN TCP http ZTC0 N1002532
Openers Ppid State Proto Lport Provider CLIM
\MYSYS.$ZTN0 2,24 LISTEN TCP telnet ZTC0 N1002532
\MYSYS.$ZTN0 2,24 LISTEN TCP telnet ZTC0 N1002532
\MYSYS 2,210 LISTEN UDP 5010 ZTC0 N1002532
Opener
Is the system name and process name of the process that opened the socket. If the process has
no name, then only the system name appears.
Ppid
Is the PID (cpu, process number) of the primary process that opened the socket.
Bpid
Is the PID (cpu, process number) of the backup process that opened the socket. If the process
pair has no backup, the field is blank.
Proto
Is the protocol used to open the socket.
Provider
Is the provider used to open the socket.
CLIM
Is the CLIM that contains the socket.
Lport
Is the local port number associated with the socket. Common port numbers are displayed with
a text name.
Example 54 displays detailed information about opened sockets using provider CSAM1.
Example 54 LISTOPENS PROVIDER Detailed
>LISTOPENS PROV $ZZCIP.CSAM1, DETAIL CIP Detailed Listopens provider \EUROPA.$ZZCIP.CSAM
Blfn:5Plfn:2 Bpid: 0,0Ppid: 2,480Opener:\EUROPA.$
RecvQ:0SendQ:0State:LISTEN Proto:TCP
CLIM-FD:41CLIM:*mult*Provider:CSAM
Laddr:0.0.0.0Lport:3333
Faddr:0.0.0.0FPort:0
246 SCF Reference for CIP