Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Example 73 displays detailed status information for the MON named ZCM03:
Example 73 STATUS MON Detailed
> STATUS MON $ZZCIP.ZCM03, DETAIL
CIP Detailed Status MON \MYSYS.$ZZCIP.ZCM03
Heap Memory Limit........ 133615616
Heap Memory Used......... 147832
PID...................... ( 3, 26)
Priority................. 200
QIO Pool Current......... 729934
QIO Pool Limit........... 0
State.................... STARTED
Trace Status............. OFF
Trace Filename...........
Fabric Status:
CLIM Mgmt Data Numdata
N1002532 XY-1 XY-1 1
N1003741 XY-2 XY-2 1
N1012542 X--1 X--1 1
Fabric Status
Displays the connections to each known CLIM and the availability of the X and Y ServerNet
fabrics. The Mgmt column shows the management connection to CLIMAGT, the Data column
shows the data path connections to the CIPSSRV processes, and the Numdata column shows
the number of CIPSSRV processes. The possible values are:
CIPMON is up, but no connection is established.--
Connection is established; only the X fabric is available.X-
Connection is established; only the Y fabric is available.-Y
Connection is established; both the X and Y fabrics are available.XY
The number suffix (for example, -1) indicates the particular set of ServerNet fabrics being used
for the connection with the CLIM. For example, XY-1 indicates that a connection is established
on both fabrics using SvNet ID 1 (the ServerNet ID of the first set of ServerNet connections0.
STATUS PROCESS
The STATUS PROCESS command displays the current status of the CIPMAN process in this system.
STATUS PROCESS Command Syntax
STATUS PROCESS $ZZCIP [,DETAIL]
Example 74 displays the state of the CIPMAN process:
Example 74 STATUS PROCESS Summary
> STATUS PROCESS $ZZCIP
CIP Status PROCESS \MYSYS.$ZZCIP
Name State PPID BPID Priority Trace
$ZZCIP STARTED ( 0, 22) ( 1, 11) 200 OFF
Example 75 displays the detailed state of the CIPMAN process:
266 SCF Reference for CIP