Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Example 75 STATUS PROCESS Detailed
> STATUS PROCESS $ZZCIP, DETAIL
CIP Detailed Status PROCESS \MYSYS.$ZZCIP
Heap Memory Limit........ 133615616
Heap Memory Used......... 69632
PID Primary.............. ( 0, 22)
PID Backup............... ( 1, 11)
Priority................. 200
QIO Pool Current......... 0
QIO Pool Limit........... 0
State.................... STARTED
Trace Status............. OFF
Trace Filename...........
STATUS PROVIDER
The STATUS PROVIDER command displays the status of the specified providers in this system.
STATUS PROVIDER Command Syntax
STATUS PROVIDER $ZZCIP.prov-name [,{DETAIL | ROUTE[,CPU cpu]}]
prov-name
Is the name of the provider for which to display status information. A wildcard can specify
multiple providers.
DETAIL
Specifies that the display is to include additional detailed status information about the provider.
ROUTE
Specifies that the display is to show Provider-routing information. This option is not valid for
the MAINTENANCE provider.
CPU cpu
Specifies the CPU for which to obtain Provider-routing information. The Default is to let CIPMAN
automatically select a CPU.
Example 76 displays the status of all known providers.
Example 76 STATUS PROVIDER Summary
> STATUS PROV $ZZCIP.*
CIP Status PROVIDER
Name Status TPStatus Trace
ZCSAM STARTED Started OFF
PROV1 STARTED Invalid (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15)
TPStatus
Shows the status of the transport-service provider process associated with the Provider. The
possible values are:
The TP is running and is a CIPSAM process.Started
A process with the specified TP name is running but the program name is not CIPSAM.Invalid
No process with the specified TP name is running in the system.Stopped
Trace
Shows which processors that have started a trace on the Provider. OFF indicates that no
processor is tracing the Provider.
CIPMAN SCF Commands 267