Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

CLIM
Shows the name of the CLIM associated with the MAINTENANCE provider. This attribute is
applicable only to provider with TYPE MAINTENANCE.
Interface Status & IP Address
Shows the maintenance Provider interface associated with the provider, giving the name,
interface status (UP, DNOP (down due to operator command, or DOWN), link pulse status,
and IP address associated with the interface.
NOTE: This attribute is not shown unless the provider is in the STARTED state.
Example 79: STATUS PROVIDER Route displays status of a provider route:
Example 79 STATUS PROVIDER Route
> STATUS PROVIDER $ZZCIP.ZTC0, ROUTE, CPU 0
CIP Detailed Status PROVIDER \MYSYS.$ZZCIP.ZTC0
Provider State.................. STARTED
Provider Routing Status (CPU 0):
Destination/Prefix Length Type CLIM ROUTE Pri
IPv4: 16.150.0.0/8 G N1002532
IPv4: default N1002532 ROUTE1 50
IPv6: 3ffe:1200:0190:0002:0215:60ff:fe04:42ec/128 S N1002532
IPv6: default N1002532 ROUTE1 50
Provider State
Indicates the PROVIDER object state, either STOPPED, STARTING, or STARTED.
CPU
Indicates the processor where provider routing information is obtained.
Destination/Prefix Length
Is the address family, IP address of the remote host or network that can be reachable via the
CLIM specified in the CLIM field, and the number of bits in the prefix or subnet mask. The
keyword default is shown for default routes (IP address and prefix length zero).
Type
Indicates the state, type, and origin of the route:
The destination is a gateway, not on the local subnetworkG
The route is for a specific host, not a networkH
The route was manually addedS
CLIM
Is the CLIM through which the remote host or network specified in the DESTINATION field is
to be reached.
ROUTE
Is the name of the ROUTE object subordinated to the specified PROVIDER object that is
associated with the default route of the specified CLIM. This field is only shown for default
routes that have associated ROUTE object.
Pri
Is the priority of the ROUTE object subordinated to the specified PROVIDER object that is
associated with the default route of the specified CLIM. This field is only shown for default
routes that have associated ROUTE object.
CIPMAN SCF Commands 271