Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

INFO PROCESS
The INFO PROCESS command displays attributes of the CIPSAM process. For compatibility with
the SAM process of TCP/IPv6, attributes that do not apply to CIP are displayed with zero (0) values.
INFO PROCESS Command Syntax
INFO PROCESS $cipsam-name [,DETAIL]
cipsam-name
Is the name of the CIPSAM process for which to display information.
DETAIL
Specifies that the display is to include additional detailed information about the object.
Example 96 displays summary information for the CIPSAM process named $ZTC1.
Example 96 INFO PROCESS (CIPSAM) Summary
> INFO PROCESS $ZTC1
CIP Info PROCESS \MYSYS.$ZTC1
*TCPSendSpace *TCPReceiveSpace *UDPSendSpace *UDPReceiveSpace
0 0 0 0
Example 96 displays detailed information for the CIPSAM process named $ZTC1:
Example 97 INFO PROCESS (CIPSAM) Detailed
> INFO PROCESS $ZTC1, DETAIL
CIP Detailed Info PROCESS \MYSYS.$ZTC1
*TCP Send Space......... 0 *TCP Receive Space...... 0
*UDP Send Space......... 0 *UDP Receive Space...... 0
*Delay Ack Time......... 0 *Delay Ack.............. OFF
*Keep Alive Idle........ 0 *Keep Alive Retry Cnt... 0
*Keep Alive Interval.... 0 QIO Limit.............. 0%
*Host ID ............... 0.0.0.0
*Host Name ............. See "SCF->HELP CIP info process" to view values.
Program Filename ...... \MYSYS.SYSTEM.SYS00.CIPSAM
*Debug.................. OFF
*Full Dump.............. OFF
*All Nets Are Local..... OFF
*TCP Compat 42.......... OFF
*EXPAND Security........ OFF
*TCP Path MTU........... OFF
*TCP Time Wait.......... 0
Trace Status........... OFF
Trace Filename ........
*ARP Timer Refreshed ... ON
*RFC1323 Enable ........ OFF
*TCP Init Rexmit Timeout 0 ms
*TCP Min Rexmit Timeout. 0 ms
*TCP Listen Queue Min... 0
*Initial TTL............ 0
The only attributes with real values are:
Program Filename
Is the name of the file that is being executed for this CIPSAM process.
Trace Status
ON when the process is being traced using SCF.
282 SCF Reference for CIP