Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)
otherwise the queue length in the socket request is used. The default value is 5. The range is
1 to 1024.
INITIAL-TTL
tacl> CLIMCMD clim-name sysctl net.ipv4.ip_default_ttl. Specifies the initial
value for UDP and TCP TTL.
INFO SUBNET
The INFO SUBNET command displays attributes of the CLIM interfaces belonging to a CIPSAM
provider in a format compatible with previous NonStop TCP/IP products. Only IPv4 addresses are
shown. Some field names in the header are tagged with an asterisk even though they are not
alterable.
INFO SUBNET Command Syntax
INFO SUBNET $cipsam-name.subnet-name [,DETAIL]
cipsam-name
Is the CIPSAM process containing the SUBNET to display.
subnet-name
Is the internally-generated SUBNET name for the CLIM interface to display. A wildcard can
specify a set of SUBNETs.
DETAIL
Specifies that the display is to include additional detailed status information about the SUBNET.
Example 98 shows info for all interfaces in the Provider associated with $ZTC02.
Example 98 INFO SUBNET (CIPSAM)
-> INFO SUBNET $ZTC02.*
CIP Info SUBNET \MYSYS.$ZTC02.*
Name Devicename *ADDRESS TYPE *SUBNETMASK SuName QIO *R
#SN0001 LO 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN0001 N1002532.lo 127.0.0.2 LOOP-BACK %HFFFFFFFF OFF N
#SN0002 N1002532.ETH1 172.17.190.101 ETHERNET %HFFFFFF00 ON N
#SN0003 N1002532.ETH2 172.17.190.102 ETHERNET %HFFFFFF00 ON N
#SN0004 N1002532.ETH3 172.17.190.103 ETHERNET %HFFFFFF00 ON N
#SN0005 N1002532.ETH4 172.17.190.104 ETHERNET %HFFFFFF00 ON N
#SN0001 N1003741.lo 127.0.1.2 LOOP-BACK %HFFFFFFFF OFF N
#SN0007 N1003741.BOND0 172.17.190.81 ETHERNET %HFFFFFF00 ON N
#SN0008 N1003741.BOND1 172.17.190.83 ETHERNET %HFFFFFF00 ON N
Name
Shows the internally-generated SUBNET name #SNnnn.
Devicename
Shows the home CLIM name and interface name associated with the SUBNET, converted to
upper case.
ADDRESS
Shows the first known IPv4 address associated with the CLIM interface.
TYPE
Shows the type of interface, LOOP-BACK for interfaces named “lo” and ETHERNET for all
others.
SUBNETMASK
Shows the subnet-mask for the first known IPv4 address associated with the CLIM interface.
SuName
Is always blank.
CIPSAM SCF Commands 285