Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

11 CLIMCMD and CLIMCMD climconfig Commands (Man
Pages)
man pages are described in these sections:
• “Standalone Commands (Man Pages)” (page 291)
• “Climconfig (Man Pages)” (page 301)
These sections contain the information for the individual man pages, and can also be viewed
directly on the CLIM. The pages listed under Standalone Commands are separate programs that
are accessible through CLIMCMD, whereas those pages in the Climconfig section are accessible
through CLIMCMD climconfig, as described in those sections.
You can view a list of these man pages in the Table of Contents of this manual or issue the man
and help commands, as described under “Linux Man Page Documentation and Help” (page 25)
and “Displaying Man Pages for CIP Commands” (page 93).
For the Multiple Providers per CLIM enhancement effective with the H06.25/J06.14 RVU, there is
a standalone prov(1p) command and also a prov(1) climconfig command. To display the standalone
prov(1p) man page, you would issue the man page command man 1p prov, and to display the
climconfig.prov(1) man page, you would issue the man 1 prov command. Syntax for man pages
is described in detail in the sections documenting them; for this example, see prov(1p) and
climconfig.prov(1).
290 CLIMCMD and CLIMCMD climconfig Commands (Man Pages)