Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

clim(1)
NAME
clim -- query and control the CLIM software.
SYNOPSIS
CLIMCMD {clim-name|ip-address} clim [option]
clim Description
clim provides a set of commands to query and control the CLIM software, and to display the
process status of each of the clim processes.
PARAMETERS
abort
Abort and dump all CLIM processes.
clearlog
Allows a CLIM that has stopped trying to restart itself after reaching a retry threshold to be
resumed. Should be followed by 'clim start'.
disable-policy-routing
Disables policy routing on the next CLIM reboot.
enable-policy-routing
Enables policy routing on the next CLIM reboot. This is the default configuration.
info
Provides clim configuration information. This command displays the current value/status of
configurable clim parameters.
onlinedebug
Packages clim-related information into a compressed tar file for debugging purposes.
reboot
Reboots the CLIM, after taking a system memory dump.
start
Starts the CLIM software.
status
Displays the process status of the CLIM processes. The details of the CLIM processes in terms
of system resource consumption are displayed. This is essentially the same as executing the
psclim command at the prompt.
ERROR MESSAGES
None.
CONSIDERATIONS
1. If the application restart threshold is exceeded, the 'clim start' command will output an error
message and switch from doing an application level restart to doing a CLIM reboot.
If the CLIM reboot threshold is exceeded, the 'clim start' command will output an error message
and exit without attempting to do any further application-level restarts or reboots. Once the
CLIM has given up attempting to restart the CLIM, operator intervention will be required to
enable the CLIM to restart. The operator can accomplish this by using the 'clim clearlog'
command, which will delete the log.
EXAMPLES
None.
292