Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

NOTE: The default behavior of CLIMCMD is to not display the SSH Client banner. Effective with
the J06.15 RVU, the SSH Client banner can be displayed in the output of CLIMCMD by setting the
TACL parameter SUPPRESSCLIENTBANNER to ‘N’ before executing CLIMCMD. To revert to the
default behavior, explicitly set the TACL param SUPPRESSCLIENTBANNER to any value other than
‘N’. For example:
> $SYSTEM SYSTEM 25> climcmd N1002531 psclim
PID RSS %MEM %CPU TIME START STAT CMD
4829 1024 0.0 0.0 00:00:27 Oct 12 Sl /usr/local/bin/climmon --time 30
4974 1180 0.0 0.0 00:00:31 Oct 12 Sl confsync
4975 23604 0.6 0.0 00:01:39 Oct 12 Sl cipssrv --number 0
4976 94008 2.3 0.5 00:44:18 Oct 12 Sl climagt --number 1
Termination Info: 0
> #SET #PARAM SUPPRESSCLIENTBANNER N
> $SYSTEM SYSTEM 25> climcmd N1002531 psclim
SSH client version T9999H06_14Jun2012_comForte_SSH_0092
PID RSS %MEM %CPU TIME START STAT CMD
829 1024 0.0 0.0 00:00:27 Oct 12 Sl /usr/local/bin/climmon --time 30
4974 1180 0.0 0.0 00:00:31 Oct 12 Sl confsync
4975 23604 0.6 0.0 00:01:39 Oct 12 Sl cipssrv --number 0
4976 94008 2.3 0.5 00:44:18 Oct 12 Sl climagt --number 1
Termination Info: 0
> #SET #PARAM SUPPRESSCLIENTBANNER Y
> $SYSTEM SYSTEM 25> climcmd N1002531 psclim
PID RSS %MEM %CPU TIME START STAT CMD
4829 1024 0.0 0.0 00:00:27 Oct 12 Sl /usr/local/bin/climmon --time 30
4974 1180 0.0 0.0 00:00:31 Oct 12 Sl confsync
4975 23604 0.6 0.0 00:01:39 Oct 12 Sl cipssrv --number 0
4976 94008 2.3 0.5 00:44:18 Oct 12 Sl climagt --number 1
Termination Info: 0
Integrated Lights Out (iLO)
iLO is supported on the CLIM and is used for operator tasks such as remotely powering up or down
the CLIM and diagnostics. For more information about iLO features, refer to the HP website http://
www.hp.com/server/lights-out. For instructions for invoking the iLO management screen, see
“Change the CLIM Passwords” (page 64).
OSM
The OSM Service Connection is used for displaying the status of the CLIM and as an alternative
to SCF for starting, stopping, adding and deleting SCF CLIM objects, and for adding SCF CLIM
objects.
30 Overview