Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

climconfig(1)
NAME
climconfig -- configure network protocol parameters
SYNOPSIS
CLIMCMD {clim-name|ip-address} climconfig command [parameter]
climconfig Description
This command is a parameter to the CLIMCMD command-line interface. It allows you to configure
network, IPSec, climiptables, iptables, ip6tables, failover and SNMP parameters. Enter CLIMCMD
at the TACL prompt on the NonStop system followed by the clim-name or CLIM IP address,
climconfig and one or more command objects and associated parameters.
COMMANDS
climconfig supports the network configuration commands documented in this section.
ERROR MESSAGES
None.
EXAMPLES
> CLIMCMD N1002581 climconfig arp -add eth1 -host 17.24.17.50 &
-hwaddress 00:0E:7f:F5:6E:8A
SEE ALSO
For details about the climconfig command arguments, see the following man pages:
CLIMCMD {clim-name|ip-address} man climconfig.all
CLIMCMD {clim-name|ip-address} man climconfig.arp
CLIMCMD {clim-name|ip-address} man climconfig.bondmode
CLIMCMD {clim-name|ip-address} man climconfig.climiptables
CLIMCMD {clim-name|ip-address} man climconfig.failover
CLIMCMD {clim-name|ip-address} man climconfig.hostname
CLIMCMD {clim-name|ip-address} man climconfig.interface
CLIMCMD {clim-name|ip-address} man climconfig.ip
CLIMCMD {clim-name|ip-address} man climconfig.ip6tables
CLIMCMD {clim-name|ip-address} man climconfig.iptables
CLIMCMD {clim-name|ip-address} man climconfig.prov
CLIMCMD {clim-name|ip-address} man climconfig.psk
CLIMCMD {clim-name|ip-address} man climconfig.remote
CLIMCMD {clim-name|ip-address} man climconfig.route
CLIMCMD {clim-name|ip-address} man climconfig.sa
CLIMCMD {clim-name|ip-address} man climconfig.slaveinterface
CLIMCMD {clim-name|ip-address} man climconfig.snmp
CLIMCMD {clim-name|ip-address} man climconfig.sp
CLIMCMD {clim-name|ip-address} man climconfig.sysctl
CLIMCMD {clim-name|ip-address} man climconfig.tunnel
CLIMCMD {clim-name|ip-address} man climconfig.vpn
302