Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

The interface interface-name is not configured.
This command is not supported for the interface lo.
This command is not supported for the interface eth0:0.
This command is not supported for the interface tunnel-interface.
The specified arp entry already exists for the interface-name.
This command does not support InfiniBand interfaces.
EXAMPLES
> CLIMCMD clim1 climconfig arp -add eth1 –host 15.76.219.4
–hwaddress 00:0E:7f:F5:6E:8A
> CLIMCMD 17.21.201.2 climconfig arp -delete eth1
–host 15.76.219.4
> CLIMCMD n100253 climconfig arp -info
Interface : eth0
IP Address : 16.107.199.1
Hardware Address : 00:01:30:10:E6:50
Hardware Type : ether
Flags : C
Mask :
> CLIMCMD n100253 climconfig arp -info -obeyform
climconfig arp \
-add eth0 \
-host 192.168.36.11 \
-hwaddress 00:1c:c4:de:cf:ae
climconfig arp \
-add eth0 \
-host 15.146.232.113 \
-hwaddress 00:1b:78:07:69:70
climconfig arp \
-add eth0 \
-host 15.146.232.1 \
-hwaddress 00:19:bb:1c:0c:00
#CLIMCMD expects 'exit' to be the last command.
#This is required to terminate CLIMCMD session.
exit
Termination Info: 0
305