Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

ERROR MESSAGES
For bondmode -modify, one or more of the Bonding interfaces is UP
The value of the bonding mode should be either 1, 5, or 6
The software MAC address of the slaves <slave interface> and <slave interface> of bonding
interface <bonding interface> cannot be same for bonding mode <mode>.
EXAMPLES
> CLIMCMD n100253 climconfig bondmode –info
Bonding Mode : 1 ( active-backup )
> CLIMCMD n100253 climconfig bondmode –info -obeyform
climconfig bondmode -modify 1
#CLIMCMD expects 'exit' to be the last command.
#This is required to terminate CLIMCMD session.
exit
Termination Info: 0
307