Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

climconfig.hostname(1)

NAME

climconfig.hostname -- manage the CLIM host name

SYNOPSIS

CLIMCMD {clim-name|ip-address} climconfig hostname -modify hostname

CLIMCMD {clim-name|ip-address} climconfig hostname -info

climconfig.hostname Description

This command modifies and displays the host name of the CLIM.

PARAMETERS

–modify

Changes the host name of the specified CLIM.

–info

Displays the host name of the specified CLIM.

hostname

Specifies the host name to be modified. The hostname is converted to upper case.

ERROR MESSAGES

None

CONSIDERATIONS

The host name of a CLIM cannot be modified when the CLIM is in the STARTED state.

The CLIM host name and the SCF CLIM object name must match. If you change the CLIM host

name, you also need to change the name of the CLIM in the host. Use SCF to delete the CLIM and

then add a new CLIM with a name that matches the new host name you have assigned to the

CLIM.

Hostname cannot exceed 8 characters.

If there are any failover configurations existing for the CLIM for which you change the hostname,

the climconfig tool automatically changes the source-CLIM name in its failover configurations.

If the interfaces of the other CLIM are configured to fail over to this CLIM, manually change the

failover configurations of the other CLIMs.

EXAMPLES

> CLIMCMD 172.18.105.17 climconfig hostname -info

CLIM1

> CLIMCMD 172.18.105.17 climconfig hostname -modify N100253