Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Not supported because Differentiated Services Code Point is QoS related.
dst
Matches parameters in Destination Options header.
[!] --dst-len length
--dst-opts type[:length][,type[:length]...]
esp
Matches the SPIs in ESP header of IPsec packets.
[!] --espspi spi[:spi]
eui64
Matches EUI-64 part of a stateless auto configured IPv6 address.
frag
Matches parameters in the Fragment header.
[!] --fragid id[:id]
[!] --fraglen length
--fragres
--fragfirst
--fragmore
--fraglast
hashlimit
Hashlimit for something like per destination-ip or per (destip, destport) tuple. It gives you the
ability to express:
“1000 packets per second for every host in 192.168.0.0/16”
“100 packets per second for every service of 192.168.1.1”
with a single ip6tables rule.
--hashlimit-upto amount[/second|/minute|/hour|/day]
--hashlimit-above amount[/second|/minute|/hour|/day]
--hashlimit-burst amount
--hashlimit-mode {srcip|srcport|dstip|dstport},...
--hashlimit-srcmask prefix
--hashlimit-dstmask prefix
--hashlimit-name foo
--hashlimit-htable-size buckets
--hashlimit-htable-max entries
--hashlimit-htable-expire msec
--hashlimit-htable-gcinterval msec
hbh
Matches parameters in Hop-by-Hop Options header.
[!] --hbh-len length
--hbh-opts type[:length][,type[:length]...]
helper
Specifies the conntrack-helper module.
[!] --helper string
328