Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

–force
Used with the -restart option, causes the command to bypass user confirmation.
-obeyform
Displays the remote configuration in the format of add command(s).
ERROR MESSAGES
For remote -add:
Please give the correct options. (The incorrect option is displayed.)
For remote -delete:
The remote information for the matched IP-address is not found.
For remote -info:
The remote information for the IP-address is not found.
CONSIDERATIONS
The configuration information is not loaded until the racoon daemon is restarted. To restart the
racoon daemon, use the restart option.
If no options are specified for the remote -info command all the remote information for the IP
addresses contained in the configuration file racoon.conf are displayed.
EXAMPLES
> CLIMCMD clim1 climconfig remote -add –ip 10.1.1.2 –M main
-dpd_delay 60 –E 3des –H md5 –A pre_shared_key –D modp768
> CLIMCMD 17.205.17.2 climconfig remote -add –ip anonymous –M main
–E 3des –H md5 –A pre_shared_key –D modp768 –restart
> CLIMCMD n100253 climconfig remote -add –ip anonymous –M main
–E 3des –H md5 –A pre_shared_key –D modp768 –restart -force
> CLIMCMD clim1 climconfig remote -add –ip 10.1.1.2 –M main
–pubcert pubkey.pem –privkey privkey.pem –E 3des –H md5 –A rsasig
–D modp768 –restart
> CLIMCMD clim1 climconfig remote -add –ip 10.1.1.2 –M main
–pubcert pubkey.pem –privkey privkey.pem –E 3des –H md5 –A rsasig
–D modp768 –restart -force
> CLIMCMD n100253 climconfig remote -add –ip anonymous –M main
–pubcert pubkey.pem –privkey privkey.pem –E 3des –H md5 –A rsasig
–D modp768
With the following command, you will be asked for confirmation that you want to restart the racoon
daemon:
> CLIMCMD clim1 climconfig remote -delete –ip 10.1.1.2 –restart
The following command does not prompt for confirmation:
> CLIMCMD clim1 climconfig remote -delete –ip 10.1.1.2
–restart -force
> CLIMCMD clim1 climconfig remote -delete –ip anonymous
> CLIMCMD clim1 climconfig remote –add_proposal –ip 10.1.1.2
–E 3des –H md5 –A pre_shared_key –D modp768 –restart
> CLIMCMD clim1 climconfig remote –delete_proposal –ip 10.1.1.2
–tag 2 –restart –force
> CLIMCMD n100253 climconfig remote -info –ip anonymous
354