Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

> CLIMCMD n100253 climconfig remote -add –prov ztc0 –ip 10.1.1.2
–M main –dpd_delay 60 –E 3des –H md5 –A pre_shared_key –D modp768
> CLIMCMD n100253 climconfig remote -delete –prov ztc0
–ip 10.1.1.2 –restart
> CLIMCMD n100253 climconfig remote –add_proposal –prov zsam1
–ip 10.1.1.2 –E 3des –H md5 –A pre_shared_key –D modp768 –restart
> CLIMCMD n100253 climconfig remote –delete_proposal –prov zsam1
–ip 10.1.1.2 –tag 2 –restart –force
> CLIMCMD n100253 climconfig remote –info –prov zsam1
> CLIMCMD n100253 climconfig remote –info –prov ztc1 –obeyform
> CLIMCMD 17.205.17.2 climconfig remote -info
Sample display for remote info:
remote 10.2.2.1 {
exchange_mode main;
proposal {
encryption_algorithm 3des;
hash_algorithm sha1;
authentication_method pre_shared_key;
dh_group modp1024;
}
}
> CLIMCMD n100253 climconfig remote -info -ip anonymous -obeyform
> CLIMCMD 17.205.17.2 climconfig remote -info -obeyform
The sample display for a remote -info -obeyform command is:
climconfig remote -add \
-ip 10.2.2.1 \
-M main \
-E 3des \
-H sha1 \
-A pre_shared_key \
-D modp1024
#CLIMCMD expects 'exit' to be the last command.
#This is required to terminate CLIMCMD session.
exit
SEE ALSO
climconfig psk, climconfig sa, climconfig sp
355