Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

location
Is the CLIM location (group, module, slot, port, and, for systems that support it, fiber) that is
invalid.
Cause
The LOCATION attribute in an ADD CLIM command is invalid because:
• One or more of the numbers contain invalid characters.
• Any of the group, module, slot, port or fiber values are out of range.
• Two or more values are inconsistent.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a correct LOCATION.
CIP 00012 (zcip-err-location-inuse)
CIP E00012 CLIM location location is in conflict with CLIM owner-name.
location
Is the specified CLIM location (group, module, slot, port, and, for some systems, fiber) in conflict
with the location already in use by an existing CLIM or has ownership of location that would
be required by the current ADD CLIM command.
owner-name
Specifies the other CLIM which has ownership of that location either explicitly for example,
has the exact same location specified in a previous ADD CLIM command) or implicitly (for
example, has an equivalent location to the location specified in a previous ADD CLIM
command).
Cause
The LOCATION attribute in an ADD CLIM command is already configured by another CLIM
object.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a different LOCATION.
CIP 00013 (zcip-err-location-incompatible)
CIP E00013 CLIM location location is invalid for this type of system.
location
Is the CLIM location (group, module, slot, port, or fiber) that is invalid.
Cause
The LOCATION attribute in an ADD CLIM command is invalid for this system.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a location that is valid for this type of system.
CIP 00015 (zcip-err-location-exclusive)
CIP E00015 CLIM clim-name is associated with an
existing maintenance Provider object.
clim-name
Is the CLIM object specified in the DELETE CLIM command.
386 SCF Error Messages