Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

CIP 00021 (zcip-err-cip-timeout)
CIP 00021 CIP command timed out on object-name.
object-name
Is the name of the object that generated the error.
Cause
A command expired before a response from the CLIM was received.
Effect
The SCF command you entered was initiated, but successful completion cannot be guaranteed.
Recovery
If possible, check if the command completed successfully; otherwise, reissue the command.
CIP 00022 (zcip-err-inv-switch-cpu)
CIP E00022 CPU is not the backup processor.
Cause
The CPU parameter in a PRIMARY command was specified, but its value was not the backup
processor number.
Effect
The command is not executed.
Recovery
Use the correct backup processor number or omit the CPU parameter.
CIP 00023 (zcip-err-hostname-invalid)
CIP E00023 hostname is an invalid hostname.
hostname
Is the hostname specified in the ADD or ALTER PROVIDER command.
Cause
The specified hostname is not a valid hostname.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a valid hostname.
NOTE: hostname is a string from zcom-tkn-objname-01 (almost identical to
zcom-tkn-objname).
CIP 00024 (zcip-err-filesystem)
CIP E00024 Command failed for object object-name due to file system error error-number.
object-name
Is the name of the object that generated the error.
error-number
Is the NonStop host-system filesystem error number encountered.
Cause
A command failed during a file system operation on a specified file (most likely a trace filename).
This caused the command to fail.
Effect
The SCF command is rejected.
Recovery
Make sure that a valid and correct filename is specified, then retry the SCF command.
389