Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Recovery
Reissue the SCF command. If the problem persists for more than a short duration, locate the
problematic CIPMON process and fix the cause for that CIPMON process' inability to process
the request from the CIPMAN process.
CIP 00033 (zcip-err-sub-not-stopped)
CIP E00033 One or more subordinate objects cannot be stopped.
Cause
A STOP or ABORT PROCESS SCF request with the SUB ALL option specified failed to stop the
CIPMAN process because the CIPMAN process cannot stop one or more subordinated CLIM
and PROVIDER objects.
Effect
The CIPMAN process is not stopped.
Recovery
If you only want to stop the CIPMAN process, reissue the STOP or ABORT PROCESS SCF request
without the SUB option or with the SUB NONE option. If you want to stop all subordinate CLIM
and PROVIDER objects as well as the CIPMAN process itself, use the ABORT PROCESS SCF
request with the SUB ALL option. If the problem persists, investigate why the subordinate objects
cannot be stopped.
CIP 00034 (zcip-err-sub-not-supported)
CIP E00034 Specified SUB option is not supported by command/object.
Cause
The SUB option is specified and it is not compatible with the specified command or the SUB
option is omitted for a command that requires the SUB option.
Effect
The SCF command is rejected.
Recovery
Make sure that a valid SUB option is specified, then retry the SCF command.
CIP 00035 (zcip-err-cpu-down)
CIP E00035 The specified processor is currently down.
Cause
You issued a TRACE command but the specified processor is currently down.
Effect
The SCF command is rejected.
Recovery
Reissue the TRACE command with a different processor.
CIP 00036 (zcip-err-wrong-prov-type)
CIP E00036 PROVIDER object-name type is not compatible with this request.
object-name
Is the PROVIDER object specified in the ADD or ALTER CLIM, ADD or ALTER PROVIDER, or
ADD ROUTE or STATUS PROVIDER, ROUTE or SWITCH CLIM, PROVIDER command.
Cause
The provider name in an ADD or ALTER CLIM, ADD or ALTER PROVIDER, or ADD ROUTE or
STATUS PROVIDER, ROUTE or SWITCH CLIM, PROVIDER command belongs to a type that is
not compatible with the command.
392 SCF Error Messages