Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
The SCF command is rejected.
Recovery
Reissue the SCF command with different provider that has the correct type or reissue SCF
command with option that is compatible with the provider type. Use the INFO PROVIDER
command to display the type of each provider.
CIP 00037 (zcip-err-invalid-clim)
CIP E00037 CLIM object-name is invalid for this request.
object-name
Is the CLIM object specified in the ADD or ALTER PROVIDER, ALTER CLIM, or ADD ROUTE
command.
Cause
The CLIM name in an ADD or ALTER PROVIDER command has operational mode that is not
compatible with the command. Or the target CLIM in an ALTER CLIM command has an operation
mode that is not compatible with the attribute specified with the command. Or the CLIM name
in an ADD ROUTE command is not associated with the parent PROVIDER object of that Route
and the MULTIPROV attribute of that CLIM is set to OFF.
Effect
The SCF command is rejected.
Recovery
Reissue SCF ADD or ALTER PROVIDER command with different CLIM that has the correct
operational mode. Or reissue the SCF ALTER CLIM command with a different CLIM that has the
correct operational mode. Or reissue the SCF ADD ROUTE command with CLIM and IPDATA
provider names that are associated with each other or with a CLIM that has the MULTIPROV
attribute set to ON. Use the INFO CLIM command to display the MULTIPROV attribute and the
IPDATA provider associated with each CLIM.
CIP 00038 (zcip-err-route-exists)
CIP E00038 CLIM clim-name is associated with an existing Route object.
clim-name
Is the CLIM object specified in the DELETE CLIM or ALTER CLIM command.
Cause
A DELETE CLIM command was issued for a CLIM object that is associated with an existing Route
object. You cannot delete a CLIM object until there are no (Maintenance Provider or Route)
objects dependent on the specified CLIM. Or an ALTER CLIM a command was issued for a CLIM
object that is associated with an existing Route object that would not be able to associate with
that CLIM object if the ALTER CLIM command successfully completes. Although a Route object
can be associated with any CLIM with MULTIPROV ON, a Route object cannot be associated
with a CLIM with MULTIPROV OFF unless the PROVIDER attribute of that CLIM is the same as
the parent of that Route object.
Effect
The SCF command is rejected.
Recovery
To remove or alter the CLIM object, the Route object associated with the specified CLIM must be
removed first. Use the INFO ROUTE command to display the CLIM associated with each Route
object.
CIP 00039 (zcip-err-storage-inuse)
CIP E00039 CLIM clim-name is in use by Storage Subsystem.
clim-name
Is the CLIM object specified in the DELETE CLIM command.
393