Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Cause
A DELETE CLIM command was issued for a CLIM object (with STORAGE operation mode) that
is being used by Storage Subsystem. You cannot delete a CLIM object until there is no reference
from Storage Subsystem to the specified CLIM.
Effect
The SCF command is rejected.
Recovery
To remove the CLIM object, the dependency of Storage Subsystem on the specified CLIM must
be removed first. See Storage Subsystem for more details.
CIP 00040 (zcip-err-interface-exists)
CIP E00040 CLIM clim-name still has interfaces running on other CLIM(s).
clim-name
Is the CLIM object specified in the DELETE CLIM or ALTER CLIM command.
Cause
A DELETE CLIM or ALTER CLIM command was issued for a CLIM object that is associated with
one or more interfaces configured on that CLIM that are currently running on other CLIM(s). You
cannot delete a CLIM object or alter PROVIDER attribute of a CLIM object with MULTIPROV OFF
until there are no interfaces configured on that CLIM running on any CLIM.
Effect
The SCF command is rejected.
Recovery
To remove the CLIM object, the interfaces associated with the specified CLIM must be removed
first. Use the STATUS CLIM, DETAIL command to display the active interfaces associated with
that CLIM. Use ABORT CLIM, INTFALL command to stop usage of all interfaces configured on
that CLIM.
CIP 00041 (zcip-err-clim-exists)
CIP E00041 PROVIDER object-name is associated with an existing CLIM object.
object-name
Is the PROVIDER object specified in the DELETE PROVIDER command.
Cause
A DELETE PROVIDER command was issued for an IPDATA provider object that is associated with
an existing CLIM object. You cannot delete a PROVIDER object until there are no (CLIM or Route)
objects dependent on the specified provider.
Effect
The SCF command is rejected.
Recovery
To remove the IPDATA provider object, the CLIM object associated with the specified IPDATA
provider must be removed first. Use the INFO PROVIDER, DETAIL command to display the names
of the CLIM associated with that IPDATA provider.
CIP 00041 (zcip-err-clim-exists)
CIP E00041 PROVIDER object-name is associated with an existing CLIM object.
object-name
Is the PROVIDER object specified in the DELETE PROVIDER command.
Cause
A DELETE PROVIDER command was issued for an IPDATA provider object that is associated with
an existing CLIM object. You cannot delete a PROVIDER object until there are no (CLIM or Route)
objects dependent on the specified provider.
394 SCF Error Messages