Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
The SCF command is rejected.
Recovery
Reissue SCF command with the correct interface name.
CIP 00046 (zcip-err-intf-fover-invalid
CIP E00046 Interface interface-name failover configuration cannot currently fail over.
interface-name
Is the interface name affected by the SWITCH CLIM command.
Cause
A SWITCH CLIM command was issued, either implicitly or explicitly, that affects an interface
which is configured for failover, but the current condition makes failover to another CLIM
impossible. The possible conditions include:
• A target CLIM or interface for failover does not exist or is invalid.
• A target CLIM is currently not accessible.
• An interface is brought down by an operator request.
• The target CLIM does not have sufficient configuration information to bring up the interface.
• The interface for failover has a visiting interface.
Effect
The SCF command is rejected for that interface.
Recovery
Use the STATUS CLIM, DETAIL command to display failover configurations for all interfaces
configured on a CLIM. Ensure that the failover configuration is correct and valid on the target
CLIM and that the target CLIM is accessible. Then reissue the SCF command.
CIP 00047 (zcip-err-intf-fover-fail
CIP E00047 Failover attempt for interface interface-name failed.
interface-name
Is the interface name affected by the SWITCH CLIM command.
Cause
An attempt to fail over an interface as part of a SWITCH CLIM command failed and the specified
interface cannot be brought up on the target CLIM.
Effect
The interface cannot be brought up on the target CLIM.
Recovery
Check CIP EMS event 5223 to find out more details about why the interface cannot be brought
up on the target CLIM. Correct the problem and reissue the SCF command.
CIP 00048 (zcip-err-clim-not-stopped
CIP E00048 CLIM(s) associated with PROVIDER object-name are not stopped.
object-name
Is the PROVIDER object specified in the ALTER PROVIDER command.
Cause
The provider name in an ALTER PROVIDER command (with SHARE-PORTS option) has one or
more associated CLIM(s) not in STOPPED state.
Effect
The SCF command is rejected.
396 SCF Error Messages