Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Recovery
Stop the CLIM(s) associated with the Provider by using the INFO PROVIDER, DETAIL command
to display the list of CLIMs associated with the Provider and then using the STOP or ABORT CLIM
command to stop the associated CLIM(s). Reissue the SCF ALTER PROVIDER command.
CIP 00049 (zcip-err-ipaddr-invalid
CIP E00049 ip-address is invalid.
ip-address
Is the IP address specified in the ADD CLIM command.
Cause
The specified IP address is not a valid IP address for a maintenance Provider.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a valid IP address.
CIP 00050 (zcip-err-connpts-invalid
CIP E00050 CONNPTS value connpts is invalid for specified location.
connpts
Is the CONNPTS attribute value specified in the ADD or ALTER PROVIDER command.
Cause
The specified CONNPTS value is not valid or not valid for the specified location.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a valid CONNPTS attribute value.
CIP 00051 (zcip-err-family-invalid
CIP E00051 FAMILY value family is invalid.
family
Is the FAMILY attribute value specified in the ADD ROUTE or PROVIDER or ALTER PROVIDER
command.
Cause
The specified FAMILY value is not valid for the specified object type or the specified FAMILY
value for ROUTE object is not valid for the specified parent provider object FAMILY.
Effect
The SCF command is rejected.
Recovery
Re-issue the command with a valid FAMILY attribute value.
CIP 00052 (zcip-err-priority-invalid
CIP E00052 PRIORITY value priority is invalid for specified location.
priority
Is the PRIORITY attribute value specified in the ADD ROUTE command.
Cause
The specified PRIORITY value is not valid.
Effect
The SCF command is rejected.
397