Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

with that provider. On each CLIM, use “climconfig interface –info all” to list all interfaces with
their associated provider to find all interfaces associated with that provider on that CLIM.
CIP 00056 (zcip-err-prov-not-exist)
Provider prov-name does not exist.
prov-name
is the PROVIDER name specified in the SWITCH CLIM command.
Cause
A SWITCH CLIM command was issued for a provider that does not exist.
Effect
The SCF command is rejected.
Recovery
Reissue SCF command with the correct provider name. (SCFPM Note: prov-name is from
zcip-tkn-provider-name.)
CIP 00057 (zcip-err-clim-incompatible)
CLIM clim-name software version is incompatible.
clim-name
is the CLIM object specified in the ALTER CLIM command.
Cause
An ALTER CLIM command was issued for a CLIM object whose software version on the CLIM is
not compatible with the new attribute value. In particular, the MULTIPROV attribute cannot be
altered to ON if the CLIM software does not support the MULTIPROV feature.
Effect
The SCF command is rejected.
Recovery
To alter the CLIM object, the configuration on the CLIM software must first be updated to be
compatible with the new attribute value. Then reissue the ALTER CLIM command.
CIP 00058 (zcip-err-interface-wrong-prov)
CLIM clim-name has interfaces associated with other PROVIDER(s).
clim-name
is the CLIM object specified in the ALTER CLIM command.
Cause
An ALTER CLIM, MULTIPROV OFF command was issued for a CLIM object that has one or more
interfaces configured on it which are associated with a provider other than the PROVIDER attribute
of the CLIM object even though the CLIM object is not in STARTED state. You cannot alter the
MULTIPROV attribute of a CLIM object to OFF until all known interfaces for that CLIM are
associated with the provider specified by the PROVIDER attribute of that CLIM object.
Effect
The SCF command is rejected.
Recovery
To set the ALTER MULTIPROV attribute of the CLIM object to OFF, the interfaces associated with
the specified CLIM and providers other than the PROVIDER attribute of that CLIM object must be
removed first. Use the ABORT CLIM, INTFALL command to stop usage of all interfaces configured
on that CLIM.
CIP 00059 (zcip-err-interface-wrong-prov)
CLIM clim-name has no association with Provider prov-name.
399