Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
The CIPMON process terminates. In an extreme case, the CIPMON processor may be halted.
Recovery
If the CIPMON processor is not halted, no recovery action is required. The CIPMON process is
restarted automatically by the persistence manager. If the CIPMON processor is halted, perform
a dump operation and reload the processor.
Origin “CIPMON” Fault Code 2002
Cause
The CIPMON process either (a) attempts to obtain an invalid type of resource, (b) attempts to
use resources that are not sufficient for the current operation, or (c) cannot obtain necessary
resources (such as memory). Check the EMS event for more details.
Effect
The current operation by CIPMON fails.
Recovery
None. CIP subsystem should automatically recover. If this problem persists, make sure sufficient
resources are available. Check the EMS event for more details about the type of resources that
caused the problem. If this problem persists for an extended period of time, report the problem
to your HP service provider.
Origin “CIPMON” Fault Code 2003
Cause
CIPMON detects that the information within an internal control block is not consistent with what
is expected.
Effect
The CIPMON processor is halted.
Recovery
This is a serious problem. Send complete information to your HP service provider.
Origin “CIPMON” Fault Code 2011
Cause
Either (a) CIPMON detects an attempt to access an invalid state machine, or (b) a state machine
corresponding to a CIP subsystem object within CIPMON is put in an unexpected state.
Effect
For (a), the CIPMON processor is halted. For (b), the CIP subsystem object corresponding to the
affected state machine is no longer accessible through that CIPMON process.
Recovery
This is a serious problem. Send complete information to your HP service provider for analysis.
Origin “CIPMON” Fault Code 2013
Cause
The CIPMON process receives a message from either the CIPMAN process or a CLIM with
version information that does not match what the CIPMON process expects.
Effect
The message is dropped or rejected.
Recovery
Make sure the correct and matching software is running on both the NonStop host system and
on the CLIM.
403