Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
The CIP subsystem does not function properly. The CIP subsystem access through that processor
is not available.
Recovery
Install the correct, compatible version of CIPMAN and CIPMON.
Origin “CIPMON” Fault Code 2034
Cause
A CIPMON process is taking unusually long time to process a set of requests. This can be caused
by insufficient QIO memory resources.
Effect
Requests that goes through that particular CIPMON (such as some sockets operations and some
SCF requests) can be slower than normal.
Recovery
None. CIP subsystem should automatically recover. If this problem persists, the operator should
make sure that sufficient QIO memory are available. If this problem persists for extended period
of time, please report the problem to your Global Customer Support Center analyst for analysis.
Origin “CIPSREQ” Fault Code 3001
Cause
The operation is invalid for the current state of the object within the CIP subsystem dynamic link
library (ZCIPDLL).
Effect
The operation fails.
Recovery
Make sure the correct and matching CIPMON and ZCIPDLL are running. If not, this is a serious
problem. Send complete information to your HP service provider for analysis.
Origin “CIPSREQ” Fault Code 3002
Cause
The operation invoked by the CIPMON process is invalid for the object type of the specified
object.
Effect
The operation fails.
Recovery
Make sure the correct and matching CIPMON and ZCIPDLL are running. If not, this is a serious
problem. Send complete information to your HP service provider for analysis.
Origin “CIPSREQ” Fault Code 3003
Cause
A DSM trace request is not consistent with the current tracing status of the specified object.
Effect
Trace operation fails.
Recovery
None. This is an informational message.
Origin “CIPSREQ” Fault Code 3004
Cause
The maintenance Provider object still has an associated interface within the CIP subsystem
dynamic link library (ZCIPDLL) and its configuration cannot be modified.
405