Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
The ALTER PROVIDER request fails.
Recovery
If this problem persists, send complete information to your HP support provider for analysis.
Origin “CIPSREQ” Fault Code 3005
Cause
One or more parameters that CIPMON passed into the CIP subsystem dynamic link library
(ZCIPDLL) are invalid.
Effect
The operation fails.
Recovery
Make sure the correct and matching CIPMON and ZCIPDLL are running. If not, this is a serious
problem. Send complete information to your HP support provider for analysis.
Origin “CIPSREQ” Fault Code 3006
Cause
The specified object does not exist within the CIP subsystem dynamic link library (ZCIPDLL).
Effect
The operation fails. The object cannot be accessed on that processor.
Recovery
This is a serious problem. Send complete information to your HP support provider for analysis.
Origin “CIPSREQ” Fault Code 3007
Cause
Some needed resources are not available to the CIP subsystem dynamic link library (ZCIPDLL).
Effect
The operation fails.
Recovery
None. The CIP subsystem should automatically recover. If this problem persists, make sure
sufficient resources are available. Check the EMS event for more details about the type of
resources that caused the problem. If this problem persists for an extended period of time, report
the problem to your HP support provider for analysis.
Origin “CIPSREQ” Fault Code 3010
Cause
The CIP subsystem dynamic link library (ZCIPDLL) encounters too many errors in communication
with the specified CLIM object.
Effect
Access to the CLIM is lost.
Recovery
None. The CIP subsystem should automatically recover.
Origin “CIPSREQ” Fault Code 3012
Cause
An unexpected error within the state machine occurred for the specified object within the CIP
subsystem dynamic link library (ZCIPDLL).
Effect
The operation fails.
406 Fault Codes