Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Effect
Access to the CLIM is lost.
Recovery
None. The CIP subsystem should automatically recover.
Origin “CIPSREQ” Fault Code 3024
Cause
The CIP subsystem dynamic link library (ZCIPDLL) detects that the specified CLIM has an invalid
operation mode or has an invalid associated PROVIDER object.
Effect
The CLIM object is not added.
Recovery
Make sure that the correct and matching NonStop host software (CIPMAN, CIPMON and
ZCIPDLL) are running. If mismatched software is not the cause, this is a serious problem. Send
complete information to your HP service provider for analysis.
Origin “CIPSREQ” Fault Code 3025
Cause
The CIP subsystem dynamic link library (ZCIPDLL) detects that the specified PROVIDER object still
has one or more associated CLIM(s) so the PROVIDER object cannot be deleted.
Effect
The PROVIDER object is not deleted.
Recovery
Make sure that the correct and matching NonStop host software (CIPMAN, CIPMON and
ZCIPDLL) are running. If the problem persists, send complete information to your HP service
provider for analysis.
Origin “CIPSREQ” Fault Code 3026
Cause
TCP/IP parameters from the specified CLIM either do not match the TCP/IP parameters from the
CLIM(s) associated with the same provider that are already started, or the ephemeral ports
information is inconsistent with the SHARE-PORTS attribute of the associated provider.
Details are given in ErrorDetails1, ErrorDetail2, and ErrorDetail3.
ErrorDetail1
Is an item defined in a sysctl parameter, displayed in hexadecimal:
Items defined in sysctl parameter net.ipv4.tcp_rmem:
mismatch for minimum tcp receive buffer size0x01
mismatch for default tcp receive buffer size0x02
mismatch for maximum tcp receive buffer size0x04
Items defined in sysctl parameter net.ipv4.tcp_wmem:
mismatch for minimum tcp send buffer size0x08
mismatch for default tcp send buffer size0x10
mismatch for maximum tcp send buffer size0x20
Items defined in sysctl parameter net.ipv4.ip_local_port_range:
mismatch for starting ephemeral port number0x40
408 Fault Codes