Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Recovery
None. The CIP subsystem should automatically recover. If the problem persists, send complete
information (especially on the NonStop host system side including CIPMAN) to your HP support
provider for analysis.
Origin “CLIMAGT” Fault Code 5134
Cause
The visiting interface specified in the current request is associated with a local interface that is
currently not active. The visiting interface can be brought up on the backup CLIM only if its
backup interface is active on the backup CLIM.
Effect
The current CLIM request failed. The visiting interface cannot be brought to the active state.
Recovery
None. The CIP subsystem should automatically recover. If the problem persists, send complete
information, especially on the NonStop host system side, including CIPMAN, to your HP support
provider for analysis.
Origin “CLIMAGT” Fault Code 5135
Cause
The local interface associated with the visiting interface specified in the current request cannot
be determined.
Effect
The current CLIM request failed. The visiting interface cannot be operated upon.
Recovery
None. Use the climconfig command to make sure the CLIM has correct and valid configuration
information. If the problem persists, send complete information (including the CIPMAN on the
NonStop host system side and the failover and interface configuration information on the CLIM
side) to your HP support provider for analysis.
Origin “CLIMAGT” Fault Code 5136
Cause
The interface specified in the current request has one or more associated tunnel interfaces still
in the active state.
Effect
The current CLIM request failed. The specified interface cannot be brought to the inactive state.
Recovery
None. The CIP subsystem should automatically recover. If the problem persists, send complete
information, especially on the NonStop host system side, including CIPMAN, to your HP support
provider for analysis.
Origin “CLIMAGT” Fault Code 5137
Cause
The interface specified in the current request has one or more associated tunnel interfaces.
Effect
The current CLIM request failed. The current CLIM request failed. The specified interface cannot
be brought to the inactive state.
Recovery
None. The CIP subsystem should automatically recover. If the problem persists, send complete
information (especially on the NonStop host system side including CIPMAN) to your HP support
provider for analysis.
413