Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

1
Slot 1: ServerNet PCIe card
2
Slot 2: One port network interface card:
2A: eth 4: customer-usable optical interface
3
Slot 3: One port network interface card:
3A: eth 5: customer-usable optical interface
4
Slot 4 (empty)
5
Slot 5 (empty)
6
Slot 6 (empty)
7
Four ServerNet ports, from left to right: XB, YB, XA, YA
8
LAN 4: eth 3 customer-usable interface
9
LAN 3: eth 2 customer-usable interface
10
ILO: Maintenance LAN interface
11
LAN 2: eth 1 customer-usable interface
12
LAN 1: Maintenance LAN interface. Eth0 and eth0:0 interface
Gen8 IP and Telco CLIMs can be configured with five copper interfaces or three copper interfaces
and two Fibre Channel interfaces. In Figure 12: DL380p Gen8 IP CLIM 1 Interfaces — Five Copper
Ethernet Interfaces (page 54), slot 2 contains an Ethernet 4 and an Ethernet 5 port, from left to
right, whereas in Figure 13: DL380p Gen8 IP CLIM and Telco CLIM Interfaces, Option 2 Three
Copper, Two Optical Interfaces (page 55), slot 2 contains an Ethernet 5 and an Ethernet 4 port,
from left to right.
Figure 12 DL380p Gen8 IP CLIM 1 Interfaces — Five Copper Ethernet Interfaces
1
Slot 1: ServerNet PCIe card
Four ServerNet ports, from left to right: AY, AX, BY, BX
2
Slot 2: 2-port network interface card, from left to right: eth5, eth4
3
Slot 3 (empty)
4
Slots 4, 5, 6 (empty)
5
LAN 4: eth 3 customer-usable interface
6
LAN 3: eth 2 customer-usable interface
7
LAN 2: eth 1 customer-usable interface
8
LAN 1: Maintenance LAN interface. Eth0 and eth0:0 interface
9
ILO: Maintenance LAN interface
54 Overview