Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Storage CLIM
For storage I/O, the CLIM supports Serial Attached SCSI (SAS) and fibre channel connections.
In addition to the features of the basic CLIM, the Storage CLIM can be configured with:
• Host Bus Adapters (HBAs) that contain a serial attached SCSI (SAS) interface
• HBAs that contain fibre channel ports
Figure 15: DL385 G2 or G5 Storage CLIM Interfaces (page 58) shows interfaces for the DL385
G2 or G5 Storage CLIM. Figure 16: DL380 G6 Storage CLIM Interfaces (page 58) shows interfaces
for the DL380 G6 CLIM.
Figure 15 DL385 G2 or G5 Storage CLIM Interfaces
1
Slot 1, Fibre Channel HBA, port 1 and port 2, numbered from top to bottom
2
Slot 2 — empty
3
Slot 3 — two pairs of ServerNet PICs
4
Slot 4 — SAS HBA
5
Slot 5 — SAS HBA that connects to the SAS disk enclosure and the internal drive
6
Two pair of ServerNet ports, from left to right: A — YX, B — YX
7
Slots 4 and 5 — SAS HBA
8
Maintenance LAN interface. Eth0 and eth0:0 interface
9
ILO
Additional SAS or FC HBA will be in slots 1 and 2.
Figure 16 DL380 G6 Storage CLIM Interfaces
1
Slot 1: ServerNet PCIe card
2
Slot 2: 2-port SAS HBA:
2A: SAS port 1E
2B: SAS port 2E
3
Slot 3 (empty)
4
Slot 4 (empty)
5
Slot 5 (empty)
58 Overview