Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

6
Slot 6 (empty)
7
Four ServerNet ports, from left to right: XB, YB, XA, YA
8
LAN 4: no connect
9
LAN 3: no connect
10
ILO: Maintenance LAN interface.
11
LAN 2: no connect
12
LAN 1: Maintenance LAN interface. Eth0 and eth0:0 interface
Additional SAS or FC HBA can be added to slots in these combinations:
Slot 4Slot 3Slot 2Configuration
SASOne SAS HBA (default)
SASSASTwo SAS HBA
FCSASOne SAS HBA , one FC HBA
FCFCSASOne SAS HBA, two FC HBA
FCSASSASTwo SAS HBA, one FC HBA
Figure 17 DL380p Gen8 Storage CLIM Interfaces
1
Slot 1: ServerNet PCIe card
2
Slot 2: 2–port SAS HBA
3
Slot 3: (empty)
4
SAS port
5
SAS port
6
Four ServerNet ports, from left to right: AY, AX, BY, BX
7
ILO: Maintenance LAN interface
8
LAN 1: Maintenance LAN interface. Eth0 and eth0:0 interface
See your system planning guide for more information about the Storage CLIM. For information
about the carrier-grade system version of the Storage CLIM, contact your support provider.
Subsystem ID and Product Numbers
The CIP subsystem ID on the NonStop host system is ZCIP (number 259). CIP includes the following
software components on the NonStop host system and CLIM:
Product NumberComponent
T0690Manager process
T0691CIP CLIM software
T0692CIP Linux OS
Subsystem ID and Product Numbers 59