Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Table 4 CLIM and Attached Storage Device Default Naming Conventions (continued)
DescriptionExampleNaming ConventionResource Type
Automatically created by
WANMGR
WANBoot process
Nineteenth SWAN adapter in the systemS19SnumberSWAN adapter
1
The fiber number only applies to NonStop BladeSystems.
CAUTION: Do not change the names of the $ZTCP0 and $ZTCP1 processes, as doing so could
lead to internal errors.
Change the CLIM Passwords
If your service provider has not already done so, change the passwords on the maintenance
interface and the iLO interfaces of your CLIMs.
1. Change the password on the iLO interface of a CLIM (the default user name and password
for the iLO are: Admin and hpnonstop):
1. In the OSM Service Connection, right click on the CLIM and select Actions.
2. In the next screen, in the Available Actions drop-down window, select Invoke
iLO and click Perform Action.
3. In the iLO interface, select the Administration tab.
4. Select the Admin local user.
5. Click View/Modify.
6. Change the password.
7. Click Save User Information.
8. Keep track of your CLIM iLO password.
2. Change the password of the maintenance interface (eth0):
64 Quick Start