Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Figure 19 Bound Socket Problem Configuration With Policy Based Routing
Figure 20 (page 84) shows a server socket configuration with these characteristics:
• There are two interfaces on the same IP subnet (A.0)
• A.0/24 is the subnet route added automatically when the IP address A.11 was configured
on the CLIM.
• eth3 is activated first (non-deterministic)
• The server is listening on the eth1 IP address
• Incoming requests come through the eth1 interface
• Outgoing requests go through the eth3 interface
Problem: The response is sent on a different interface than the one the request came in on.
Policy Based Routing 83