Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

hoplimit 4294967295
Data Provider ZTC0 IPv4 Routing table
TABLE main:
1.1.1.1 dev eth2 scope host metric 5
1.1.1.0/24 dev eth2 proto kernel scope link
src 1.1.1.14
1.1.1.0/24 dev eth1 proto kernel scope link
src 1.1.1.15
1.1.1.0/24 dev eth3 proto kernel scope link
src 1.1.1.13
TABLE ETH1:
1.1.1.0/24 dev eth1
TABLE ETH2:
1.1.1.1 dev eth2 scope host metric 5
1.1.1.0/24 dev eth2
TABLE ETH3:
1.1.1.0/24 dev eth3
Data Provider ZTC0 IPv6 Routing table
TABLE main:
fe80::/64 dev eth2 proto kernel metric 256 mtu 1500
advmss 1440 hoplimit 4294967295
fe80::/64 dev eth1 proto kernel metric 256 mtu 1500
advmss 1440 hoplimit 4294967295
fe80::/64 dev eth3 proto kernel metric 256 mtu 1500
advmss 1440 hoplimit 4294967295
TABLE ETH1:
fe80::/64 dev eth1 metric 256 mtu 1500 advmss 1440
hoplimit 4294967295
TABLE ETH2:
fe80::/64 dev eth2 metric 256 mtu 1500 advmss 1440
hoplimit 4294967295
TABLE ETH3:
fe80::/64 dev eth3 metric 256 mtu 1500 advmss 1440
hoplimit 4294967295
The original entries are listed under “TABLE MAIN”. Additional tables are listed as “TABLE ETH5”,
and so on.
Example 6 Climstatus Command IP Routing Table Information (IP and Telco CLIM) (RVUs prior to
J06.10/H06.21
\MYSYS.$SYSTEM.STARTUP 3> CLIMCMD n1002532 climstatus -o r
Kernel IP routing table:
Destination Gateway Genmask Iface
localnet * 255.255.255.0 eth0
172.17.214.0 * 255.255.255.0 eth1
172.17.0.0 172.17.214.1 255.255.0.0 eth1
224.0.0.0 * 240.0.0.0 eth1
224.0.0.0 * 240.0.0.0 eth0
default 16.107.192.1 0.0.0.0 eth0
.......................................................................
.......................................................................
Kernel IPv6 routing table:
Destination Next_Hop
Flags Metric Ref Use Iface
::1/128 ::
U 0 13 2 lo
90 CIP Configuration and Management