Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

::1.2.3.4/128 ::
U 0 0 2 lo
::3.4.5.6/128 ::
U 0 0 2 lo
::4.3.2.1/128 ::
U 0 0 2 lo
::16.107.192.195/128 ::
U 0 0 2 lo
::127.0.0.1/128 ::
U 0 0 2 lo
::172.17.190.2/128 ::
U 0 0 2 lo
::172.17.190.5/128 ::
U 0 0 2 lo
::172.17.214.50/128 ::
U 0 0 2 lo
3ffe:1200:aaaa:bbbb::/128 ::
U 0 0 2 lo
Hard Disk Space Usage
This display shows information pertaining to hard disk space usage.
Example 7 Climstatus Command Hard Disk Space Usage
\MYSYS.$SYSTEM.STARTUP 3> CLIMCMD n1002532 climstatus -o h
CLIM1:~#climstatus -o h
Filesystem Disk Space Usage
Filesystem Type Size Used Avail Use% Mounted
/dev/sda2 ext3 32G 11G 20G 36% /
tmpfs tmpfs 2.0G 64K 2.0G 1% /dev/shm
tmpfs tmpfs 10M 9.8M 224K 98% /dev
Failover Configuration
This display shows failover configuration.
Example 8 Climstatus Command Failover Configuration (IP CIP)
\MYSYS.$SYSTEM.STARTUP 3> CLIMCMD n1002531 climstatus -o f
Interface Failover Configuration:
Source Destination
N1002531.eth1 N1002533.eth1
N1002531.eth2 N1002533.eth3
IPSec Configuration
This display shows IPSec configuration.
Example 9 Climstatus Command IPSec Configuration (IP and Telco CLIM)
For CLIM(s) with the MultiProv feature enabled, the following is the output for IPSec configuration.
\MYSYS.$SYSTEM.STARTUP 3> CLIMCMD n1002531 climstatus -o i
Data Provider ZTC0 Security Policies
---------------------------------------------------
10.3.3.2[any] 10.1.1.2[any] any
in ipsec
esp/transport//require
created: Feb 8 14:54:57 2007 lastused:
lifetime: 0(s) validtime: 0(s)
spid=8 seq=2 pid=369
refcnt=1
10.1.1.2[any] 10.3.3.2[any] any
Displaying the CIP Configuration 91