Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

Netmask : 255.255.252.0
ROUTE Details :
- Route Type : Default Route
Destination Address : 0.0.0.0
Netmask : 0.0.0.0
Gateway Address : 16.107.200.1
Metric : 0
Minimum RTO : Unspecified
InitCWND : Unspecified
Auto Negotiation Details :
- Status : on
Line Speed : Not Applicable
Duplex : Not Applicable
Software MAC Address : Unspecified
Interface : eth0:0
Interface Type : Logical Interface
IP Address : 16.107.201.144
Netmask : 255.255.252.0
Interface : ib1
Interface Type : Physical Interface
MTU Size : 2044
IP Address : 16.107.201.98
Netmask : 255.255.252.0
ROUTE Details :
- Route Type : Default Route
Destination Address : 0.0.0.0
Netmask : 0.0.0.0
Gateway Address : 16.107.200.1
Metric : 0
Minimum RTO : Unspecified
InitCWND : Unspecified
Interface : ib0
Interface Type : Physical Interface
MTU Size : 2044
IP Address : 16.107.201.96
Netmask : 255.255.252.0
2. Delete CLIM interfaces
> CLIMCMD c1002581 ifstop eth2 –force
comForte SSH client version T9999H06_20Mar2008_comForte_SSH_0079
Interface is stopped.
Termination info: 0
\BLITUG.$SYSTEM.SABUN 15> CLIMCMD c1002581 climconfig interface –delete eth2
comForte SSH client version T9999H06_20Mar2008_comForte_SSH_0079
Deleted the Interface.
Termination info: 0
3. Check that all data interfaces are deleted.
> CLIMCMD C1002582 climconfig interface –info all
comForte SSH client version T9999H06_20Mar2008_comForte_SSH_0079
Interface : lo
Interface Type : Loopback Interface
Interface : eth0
Interface Type : Physical Interface
Jumbo Frame : NO
IP Address : 192.168.37.82
Netmask : 255.255.0.0
ROUTE Details :
– Route Type : Default Route
Destination Address : 0.0.0.0
Netmask : 0.0.0.0
Gateway Address : 0.0.0.0
96 CIP Configuration and Management