DataLoader/MP Readme

ManualsBrandsHP ManualsServerHP Integrity NonStop J-Series

README.txt

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name:

NM DataLoader/MP

Product ID:

HSE41V1

Component Products:

T0330H01 NM DataLoader/MP

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You will need Adobe Acrobat

Reader to read or print the IPSetup User Guide. Visit Adobe's

website to download the latest Adobe Acrobat Reader:

http://www.adobe.com

4. Decide whether you will use DSM/SCM to move files to Installation

Subvolumes (ISVs) after files are placed on the workstation. Using

DSM/SCM is optional, but is recommended when DSM/SCM is available.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. Run IPSetup to place (move files from the CD to the workstation)

and install (move NonStop Kernel files to correct ISVs) this

product. If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the IPSetup

User Guide section "Manual Software Placement Using the IPSetup

TACL Program" to manually place NonStop Kernel files.

7. Follow the post-installation instructions in Section III below, if

any, after using IPSetup to place and install this product.

II. Pre-Installation Instructions

None

III. Post-Installation Instructions

1. Change the file code of the LINKABLE and OEXITS files by entering

the following commands while logged on as a userid that has

authority to alter the files:

FUP ALTER E0330H01.LINKABLE,CODE 800

FUP ALTER E0330H01.OEXITS,CODE 800

If you had IPSetup rename the DSV to the ISV, then use the ISV

location instead of E0330H01 in the above commands.

Page 1

Summary of content (4 pages)

PAGE 1
README.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2005 HP Product Name: NM DataLoader/MP Product ID: HSE41V1 Component Products: T0330H01 NM DataLoader/MP I. Basic Product Installation Instructions 1. Ensure that requirements for using this product are met (see Section IV Product Requirements below). 2. Ensure that prerequisites for the installation utility and any product-specific installation requirements are met (see Section V Installation Prerequisites below). 3.
PAGE 2
README.txt 2. Follow normal DSC/SCM procedures for bringing the DSV created by IPSetup into the DSM/SCM Software Archive and performing a Build/Apply to move the files from the Archive into their ISV. If you do not use DSM/SCM, perform the steps in section VIII, then resume at step 3, immediately below. 3. Check the ownership and security of the files in the ZDTLOAD2 subvolume.
PAGE 3
README.txt Microsoft TCP/IP stack and FTP client VI. Manuals Included On this CD 424148-003 DataLoader/MP Reference Manual VII. CD-ROM Root Directory Contents AUTORUN.INF File containing CD AutoRun commands. AXDIST.EXE Microsoft redistributable library files. IPSETUP.CNT File containing help contents for the CD installation utility IPSetup. IPSETUP.EXE File containing the main executable for IPSetup. IPSETUP.HLP File containing help text for IPSetup. LICENSE.
PAGE 4
README.txt FUP DUP E0330H01.*, [$ISV.]ZDTLOAD2.*, SAVEALL 3. Two FUP ALTER commands must be entered manually after the installation is done. See the Softdoc for the details.