DataLoader/MP Readme

README.txt
2. Follow normal DSC/SCM procedures for bringing the DSV created by
IPSetup into the DSM/SCM Software Archive and performing a
Build/Apply to move the files from the Archive into their ISV.
If you do not use DSM/SCM, perform the steps in section VIII,
then resume at step 3, immediately below.
3. Check the ownership and security of the files in the ZDTLOAD2
subvolume. The protection for the file DATALOAD should be such
that it is executable by any userid who needs to run or create
applications that use NM DataLoader/MP. The protection for all
the rest of the files should be such that they are readable by
any userid who needs to run or create NM DataLoader/MP
applications.
4. Add T0330 to the DSM/SCM software revision each time you create a
software revision by copying the full contents of a SUT. And
after you have converted all your loading applications to use
T0330, each time you create a new software revision by copying
the full contents of a SUT, check for T7900 and delete it from
the software revision if it appears there.
IV. Product Requirements
Required Hardware:
HP Integrity NonStop servers
Minimum OS Release:
HP NonStop Kernel release H06.03 or higher
Required Software:
T1269 TNS/E C Runtime Library
Optional Software:
T0549 CCOMP compiler
T0356 ECOBOL compiler
T0357 TNS/E COBOL Runtime Library
Disk Space Requirement:
5 megabytes software only
15 megabytes software and data files
V. Installation Prerequisites
Required Hardware:
HP NonStop Server
Communications controller allowing file transfer
from PC to HP NonStop Server
PC with 500 MHZ Pentium processor or higher and all of the following:
CD-ROM drive
VGA or higher-resolution video adapter and monitor
Microsoft Mouse or similar pointing device
Communications controller allowing file transfer
from PC to HP NonStop Server
Required Software:
NSK TCP/IP stack and FTP Client
Microsoft Windows 2000 or later
Page 2