DataLoader/MX Reference Manual (H06.03+, J06.03+)

Error and Warning Messages
DataLoader/MX Reference Manual—543544-001
A-8
File System Messages
Cause. The record listed in CSV file is too long.
Recovery. Check the field description and data to make sure the length specified is
long enough for data and restart DataLoader/MX.
Cause. The specified value is out of the one-byte INT range (0 and 256).
Recovery. Change the data description field to accommodate the data and restart
DataLoader/MX.
Cause. The specified value is out of the two-byte INT range (0 through 65536).
Recovery. Change the data description field to accommodate the data and restart
DataLoader/MX.
Cause. The specified value is out of the four-byte INT range.
Recovery. Change the data description field to accommodate the data and restart
DataLoader/MX.
Cause. The specified datetime field is not in the correct format.
Recovery. Check syntax for CSV on page 4-2, modify the data accordingly, and
restart DataLoader/MX.
Cause. The Guardian procedure call READEDIT operation has failed for the file
specified with the error listed.
Recovery. Resolve the error and restart DataLoader/MX.
Cause. Blocking is not allowed for EDIT files because it is done by the file system.
Recovery. Remove the block specifier from the EDIT file and restart DataLoader/MX.
DTLReadCSV: Value out of range for a 1 byte int (data)
DTLReadCSV: Value out of range for a 2 byte int (data)
DTLReadCSV: Value out of range for a 4 byte int (data)
DTLReadCSV: Datetime has bad syntax (data)
DTLReadEdit: READEDIT failed with error on file failed
DTLRealOpen: Blocking not allowed for edit files file
DTLRealOpen: Not allowed to open yourself